DS200DDTBG2A

General Electric Speedtronic Mark V DS200DDTBG2A is an LCI Auxiliary I/O Terminal Board (DDTB) and is a part of gas turbine control systems. This high-voltage board connects peripheral and auxiliary input/output signals to the system. It's simple to install on a DSPC that already has an ADMA daughterboard mounted. The ADMA is connected to the board using ribbon cables and high-density connectors. When the DS200DDTBG2A is inserted into a drive, it provides a number of I/O ports. The card has a number of different analog and digital I/O slots. One of the two isolated inputs can be used to connect high voltage AC signals.

• The six inputs with current detecting resistors capable of accepting 5A can be fed CT inputs. There are three more inputs with current sensing resistors that are suitable for 0.224 A LEM signals. To accommodate 4 to 20 mA current loop signals, any two of the CT and LEM inputs can be changed.
• There are four buffered analog outputs on the board. The DS200DDTBG2A can also take and send digital I/O. On the PCB, there are two form C relay outputs. These can provide outputs rated at 20A (at 240 VAC) or 10A (at 110 VAC) (at 30 VDC).
• Four optically isolated outputs are also included on the board, with solid-state relays rated at 48V. The eight isolated universal inputs of Digital I/O are capable of receiving 24-250 VDC, 24-230 VAC (at 60 Hz), or 125-230 VAC (at 50 Hz). An LED status indicator is included with each digital I/O terminal.