DS200TBSAG1A

DS200TBSAG1A is a Level Monitoring Transducer Terminal Board developed by GE. The TBSA terminal board is in location eight of R2. The pressure transducer signal wires from the externally-mounted XDSA board for DLE applications and the FMVED serial link wires are connected to this terminal board.

• The pressure transducer signals are connected to the TCSA board in R. The FMVED signals are connected to the PCM daughterboard on the IO Engine in R2. The module's transducer hardware is capable of providing conversion applications to convert energy from one form to another.
• The component is a thin circuit board with green mounting hardware for installation into a Speedtronic Mark V module.WOC can supply these modules as part of our inventory of industrial automation equipment and hardware.

DS200TBSAG1A Connections

• P3 - Receives 12 V dc power from TCSA in R and connects it to DLE serial pressure transducers. This connection also links the pressure signals from the transducers back to the TCSA board in the R core.
• P4 - Receives 12 V dc power from TCSA in R and connects it to FMVED motor controllers.
• Connects P3 on the PCM daughterboard on the UCPB in R2 to P5 on the FMVED communication channels 1 and 2.
• Connects P6 on the PCM daughterboard on the UCPB in R2 to channels 3 and 4 of the FMVED.

TBSA Hardware Configuration

These hardware jumpers allow the transmit and receive communication circuits for the FMVED motor controller serial links in the TBSA hardware configuration JP1 through JP16.