DS200TCEBG1B

DS200TCEBG1B (GE Protective Termination Expander Board) features 3 bayonet connectors, 4 signal transformers, one 26-pin connector, four 10-pin connectors and three 20-pin connectors. DS200TCEBG1B (Mark V series) diagnostic tools are limited, although, you can use the available diagnostic tools on the drive to understand the board and all components in the drive. DS200TCEBG1B (Mark V series) diagnostics will generate a report that includes all warning, error and trip conditions generated by the drive.\n\nThe diagnostic report of DS200TCEBG1B (Mark V series) also includes the details of the boards in the drive. From DS200TCEBG1B?s report, you can find the cause of the problem and how to resolve the issue. Through a serial cable, you can upload the report to a laptop that is connected to the drive.?\n\nDS200TCEBG1B (Mark V series) is located in the <P1> core. DS200TCEBG1B holds the microprocessor circuitry for the protection of DS200TCEBG1B (Mark V series), the DS200TCEBG1B (Mark V series) being known as the protective processer.?\n\nDS200TCEBG1B (GE Protective Termination Expander Board) scales the PT and CT signals used by the TCCB board, which are used for the generator, bus voltages and line current, which are then landed on the PTBA terminal board.

Product DESCRIPTION

Part Number

DS200TCEBG1B

Manufacturer

General Electric

Country of Manufacture

As Per GE Manufacturing Policy

Series

Mark V

Function

Module

Availability

In Stock

services we provide

Testing & Repair

Repair and Testing of circuit boards to diagnose ensure functionality to maintain current inventory and retain obsolete circuit boards/modules.

Training

Controls including HMI Training for Engineers, Technicians and Operators with wide variety of practical equipment including Management and Health & Safety.

Purchase

You upgrade equipment and we purchase your surplus inventory to maximize the value of unused or end of life assets.

TECHNICAL SPECIFICATIONS FOR GE - DS200TCEBG1B

DS200TCEBG1B is a Protective Termination Expander Board and is part of the GE Speedtronic Mark V gas turbine control system. This board is located in the P1 Core location 2, Scales the potential transformer and current transformer used by the TCCB boards in the R5. These signals are used for the generator and bus voltages and line current and are landed on the PTBA terminal board. There are no hardware jumpers on the TCEB board for the configuration. The alarm horn jumper is located on the PTBA terminal board. There is no software configuration on the TCEB board.

featured products