GE IC200PWR001 - Buy, Repair, and Exchange From Unisys

Product DESCRIPTION

Part Number

IC200PWR001

Manufacturer

General Electric

Country of Manufacture

As Per GE Manufacturing Policy

Series

Mark VI/VIe

Function

Module

Availability

In Stock

services we provide

Testing & Repair

Repair and Testing of circuit boards to diagnose ensure functionality to maintain current inventory and retain obsolete circuit boards/modules.

Training

Controls including HMI Training for Engineers, Technicians and Operators with wide variety of practical equipment including Management and Health & Safety.

Purchase

You upgrade equipment and we purchase your surplus inventory to maximize the value of unused or end of life assets.

TECHNICAL SPECIFICATIONS FOR GE - IC200PWR001

The GE Fanuc IC200PWR001 is a 24 Volts DC power supply input module that provides power to CPU, NIU, and I/O modules via the backplane. The power supply module has a maximum output current of 1.5 amps via 3.3 volts & 5-volt output, with up to 0.25 amps on the 3.3-volt output. If the power supply module is mounted on the CPU or NIU, it can be considered the station's main power supply. When mounted on a Power Supply Booster Carrier, the supply module can also be used as a backup power supply. It has an input voltage range of 18 to 30VDC, a nominal voltage of 24VDC, and an input power of 11 watts.

This power supply module has a 10ms holdup time, an inrush current of 20A at 24VDC, and a 25A inrush current at 30VDC. It also has an output voltage of 5VDC and 3.3VDC. The total output current should not be more than 1.5A.
The supply module provides short circuit, overload, and reverse polarity protection. DC- must be grounded to frame/earth ground when wiring. Because DC- is grounded to the power supply's internal frame, floating power sources should not be used.

featured products