Home     GE Turbine Control     GE     IS200DAMDG2A

ProductS

IS200DAMDG2A

GATE DRIVER,180/125/92A
Product DESCRIPTION
Part Number
IS200DAMDG2A
Manufacturer
General Electric
Country of Manufacture
As Per GE Manufacturing Policy
Series
Mark VI/VIe
Function
Module
Availability
In Stock
services we provide
Purchase Icon
Testing & Repair
Repair and Testing of circuit boards to diagnose ensure functionality to maintain current inventory and retain obsolete circuit boards/modules.
Exchange Icon
Training
Controls including HMI Training for Engineers, Technicians and Operators with wide variety of practical equipment including Management and Health & Safety.
Repair Icon
Purchase
You upgrade equipment and we purchase your surplus inventory to maximize the value of unused or end of life assets.
TECHNICAL SPECIFICATIONS FOR GE - IS200DAMDG2A

IS200DAMDG2A is a Gate Drive Interface Board manufactured and designed by General Electric as part of the Mark VI Series used in GE Drive Control Systems. The function of the Gate Drive Interface Board is to amplify the gate signals that control the power switches and to interface with the control system of the machinery. This board operates at a Frame Rate of 125, which refers to the frequency at which the board can send signals to the machinery. The Powerrex IGBT used in this board is the CM200DY-28H. The board comes with three board/drive units, which means that three separate units can be used to control different aspects of the machinery. The IGBT/phase leg configuration for each unit is one dual, which means that each unit contains one dual IGBT that controls one phase leg of the machinery. The Digital Amplifier Module board is a type of circuit board that serves as an interface between power-switching devices, specifically Insulated Gate Bipolar Transistors, and the control rack in low-voltage drives.

FEATURES

Interface Between Power Switching Devices and Control Rack: Serves as a crucial interface between the power switching devices, such as IGBTs, and the control rack in low voltage drives. This interface enables seamless communication and control signals between the control system and the power-switching devices, ensuring proper operation and synchronization.

Power Rating: The board is designed with a power rating of either 125 frames or 92 frames. This power rating indicates the board's capacity to handle and regulate power within the low-voltage drive system. It ensures that the board can effectively handle the power demands of the connected IGBTs and facilitate efficient power switching operations.

Non-Amplifying Interface: Do not amplify power and do not require a power input. They function solely as an interface, connecting the collector terminals, emitter, and IGBT gate of the power switching devices to the BPIA Bridge Personality Interface board of the control rack. This non-amplifying nature allows for a direct and reliable connection without introducing additional amplification stages.

Absence of Fuses, Test Points, and Configurable Items: Do not include fuses, test points, or configurable items. These boards are specifically designed to provide a clean and straightforward interface without additional components or options. This simplifies the board's design and ensures its dedicated functionality as an interface module.

Dual-IGBT Module per Phase Leg: Equipped with one dual-IGBT module. This module consists of two IGBTs and supports the precise control and switching of power within the low-voltage drive system. The presence of a dual-IGBT module allows for efficient and coordinated power-switching operations.

Light-Emitting Diodes (LEDs): Incorporates four light-emitting diodes (LEDs) to provide visual feedback on the system's status. Two LEDs are yellow, and the other two are green. These LEDs are labeled DS1 (yellow), DS2 (green), DS3 (yellow), and DS4 (green) and are further identified as 1ON, 1FF, 2ON, and 2FF, respectively. These LEDs serve as indicators for different operating conditions, providing users with real-time feedback on the status of the board and the connected components.

Connector Pins for IGBT Connections: Features twelve connector pins that are specifically designed for IGBT connections. These pins include G2IN, COM2, NC, C2, COM1, G1IN, and C1. These pins ensure secure and reliable connections between the board and the IGBTs, facilitating proper signal transmission and control over the power switching devices.

Compact and Attachable Design: Small in size and shaped like the letter C. This compact design allows for easy integration and installation within the low-voltage drive system. Furthermore, if needed, these boards can be attached to larger boards, providing flexibility in system configuration and expansion possibilities.

featured products
  • IS420UCSBH4A
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems
  • IS220PSCAH1B
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems
  • IS220PDIAH1B
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems
  • IS220PDOAH1B
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems
  • IS200STCIH2A
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems
  • IS200SRLYH2A
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems
  • IS200SSCAH2A
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems
  • IS200SHRAH2A
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems
  • IS220PPROS1B
    Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems