IS200EBKPG1A

IS200EBKPG1A is an Exciter Back Plane Board manufactured and designed by General Electric. It is a part of the EX2100 Series used in Excitation Control Systems. The IS200EBKP Exciter Back Plane (EBKP), which is a component of the control module, serves as the backplane for the control boards and as the connection for the cables that link to the I/O terminal boards. For the controllers M1, M2, and C, EBKP comprises three portions. Each segment has its own, independent power source.

IS200EBKPG1A Features

• The ACLA, DSPX, EISB, EMIO, and ESEL boards are present in Sections M1 and M2. DSPX, EISB, and EMIO are all included in Section C. The control boards are arranged in a rack, and two cooling fans are located at the top of the rack.
• Twenty-four DIN connectors are included in the backplane's upper section. Three circular DIN connectors, three 12-pin power supply plugs, three fan power plugs, and 30 Testpoints are located on the lowest portion of the backplane. There are also 27 D-SUB connectors there.

Application Data

• There are no LEDs, fuses, or movable parts on the EBKP board. For the purpose of diagnosing signals, the board features test points.
• Digital-to-analog converters and diagnostic analog-to-digital converters can access signals through the test points.

Exciter Gate Pulse Amplifier Connector

• There are six connectors available for the ESEL board to drive up to six EGPA boards.
• For PCMs (bridges) 1 through 6, these are located at J306, J307, J406, J407, J506, and J507, respectively. How many of these connectors are driven depends on the ESEL board's group number.