Home     GE Turbine Control     GE Mark VI     IS200RAPAG1A

ProductS

IS200RAPAG1A

BD,RACK POWER SUPPLY
Product DESCRIPTION
Part Number
IS200RAPAG1A
Manufacturer
General Electric
Country of Manufacture
As Per GE Manufacturing Policy
Series
Mark VI/VIe
Function
Module
Availability
In Stock
services we provide
Purchase Icon
Testing & Repair
Repair and Testing of circuit boards to diagnose ensure functionality to maintain current inventory and retain obsolete circuit boards/modules.
Exchange Icon
Training
Controls including HMI Training for Engineers, Technicians and Operators with wide variety of practical equipment including Management and Health & Safety.
Repair Icon
Purchase
You upgrade equipment and we purchase your surplus inventory to maximize the value of unused or end of life assets.
TECHNICAL SPECIFICATIONS FOR GE - IS200RAPAG1A

IS200RAPAG1A is a Rack Power Supply Board developed by General Electric. It is a part of Mark VI control system. The board is equipped with essential components to ensure seamless operation within the control system. It features a 1 amp, 250 V fuse, a 24 Vdc isolated power supply, a serial 1024-bit memory device, and a parallel-style bus host processor. These components collectively facilitate the reliable distribution of power and data throughout the system.

OPERATION

  • DC Control Voltage Provision: The primary function of the board is to supply the necessary DC control voltages required by other boards housed within the Innovation Series board rack. The P1 connector interface, located on the board, establishes a connection with the system's backplane, enabling the distribution of control voltages to various components within the rack.
  • Interface with Backplane: The P1 connector serves as the interface point through which the board communicates with the backplane of the Innovation Series rack. This interface ensures seamless integration and coordination with other boards, facilitating the exchange of control signals and voltage distribution across the system.
  • Control Over System Functions: In addition to voltage provision, the board assumes control over critical system functions such as Power ON and Master RESET. By managing these functions, the board ensures the smooth operation and integrity of the overall system, initiating startup sequences and system resets as required.
  • System Integrity Assurance: The board plays a crucial role in maintaining system integrity by overseeing essential operational aspects. It monitors power supply statuses, initiates necessary resets, and ensures that all connected components receive the required control voltages for optimal performance.
  • Coordination with Other Boards: As part of a larger control system, the board coordinates closely with other boards within the Innovation Series rack. It collaborates with neighboring boards to synchronize system activities, exchange data, and maintain operational consistency across the entire system.
  • Continuous Monitoring and Adjustment: Throughout operation, the board continuously monitors system parameters and adjusts control voltages as needed to meet dynamic operational demands. This adaptive control mechanism ensures reliable performance and system stability under varying conditions.

    • INSTALLATION

  • Locate P1 Backplane Connector: Identify the P1 backplane connector within the Innovation Series board rack. This connector serves as the interface for connecting the board to the rack's backplane.
  • Align Connector Rows: The P1 connector consists of three rows, each featuring 32 pins. Ensure proper alignment of the board's connector with the corresponding rows on the P1 connector to facilitate secure and reliable connectivity.
  • Connect Board: Carefully insert the board into the P1 backplane connector, ensuring that the pins on the board's connector align correctly with the corresponding pins on the connector rows. Apply gentle pressure to firmly seat the board in place, ensuring a stable connection.
  • Verify Installation: After connecting the board, visually inspect the connection to confirm that it is secure and properly aligned. Verify that all pins are fully engaged and there are no gaps between the board and the backplane connector.
  • Check Diagnostic Elements: Take note of the additional diagnostic elements provided on the board. These include two LED indicators and four test points, which offer valuable diagnostic information for system maintenance and troubleshooting purposes.
  • Ensure Proper Functionality: Power on the system and verify that the board is functioning as expected. Monitor the LED indicators for abnormal behavior and use the test points to perform diagnostic tests.
  • Secure the Installation: Once the board is successfully installed and verified, ensure that it is securely fastened within the rack to prevent any movement or disconnection during operation.

    • FRONT PANEL FEATURES

  • Reset Switch: An accessible reset switch is provided on the front panel, allowing users to initiate system resets with ease when necessary.
  • Test Points (TP): Four TP (Test Point) connections are available on the front panel, facilitating diagnostic testing and troubleshooting procedures. These test points enable technicians to measure and monitor key parameters of the board's operation for maintenance purposes.
  • LED Indicators: Two LED indicators, labeled MPOK and IPOK, are prominently featured on the front panel. The MPOK indicator provides visual feedback on the status of the board's main power, while the IPOK indicator indicates the status of the board's input power. These LED indicators offer at-a-glance monitoring of essential system parameters, enhancing overall visibility and awareness.
  • Secure Attachment: The front panel is securely attached to the circuit board via two screw connections. This robust attachment mechanism ensures durability and stability during operation, minimizing the risk of detachment or damage.
  • User-Friendly Design: The front panel's layout and design prioritize user-friendliness, providing convenient access to essential features and diagnostic elements. Clear labeling and intuitive placement of controls and indicators enhance usability and streamline troubleshooting processes.
  • Durability and Stability: Built to withstand demanding industrial environments, the front panel's construction and attachment mechanism are optimized for durability and stability. This ensures reliable performance even in challenging operating conditions, contributing to the overall longevity of the board.

    • PROTECTION AND COMPONENTS

  • Critical to its functionality, the board incorporates a 1 amp, 250 V fuse, safeguarding the 24 Vdc isolated power supply from potential electrical faults. Integrated circuits, including a serial 1024-bit memory device, ensure efficient data management and processing.
  • The board also features transistors, heat sinks, capacitors (including high-voltage capacitors), resistors, and an inductor coil, collectively contributing to its robust design and performance.
    • featured products
    United States
    Copyright © - Unisys Group. All Rights Reserved.