IS200ESYSH3A is an I/O terminal board developed by GE. The model is a simplex control that is part of General Electric's EX2100e series. Isolation transformers are used in this model. The model has seven auxiliary contact inputs and a 55 VDC power supply. The interface board is used with generator voltage PTs and CTS required for protection functions. The board accepts external I/O and outputs transducers. It is intended to handle all input and output interfacing requirements. PT and CT inputs, general-purpose and trip relay outputs, analog inputs and outputs, and digital control inputs are all included. These interfaces take place via terminal boards mounted on the ESYS board via terminal strips that provide terminal connections. Typically, these daughter boards are HSSL or HSLA boards.
Features
This board's functional acronym is ESYS, which stands for Excitation Control System I/O Interface. This board's primary function is to connect the basic input and output to the exciter within the control system. The board will handle the majority of the EX2100e system I/O interfaces. The interfaces will be sent to the EX2100e control system via the attached HSLA high-speed serial link (HSSL) daughterboard.
The model is divided into three groups: H3, H2, and H1, each with its own redundancy mode. Because the model is an H3, it will function as a simplex control.
Apart from having different redundancy modes and fewer control sections than the other groups, these boards operate in the same way, for example, by supporting excitation contact outputs and inputs. The board can handle CT and PT inputs; there are two generator CT inputs with current ratings of 1 A or 5 A that provide current feedback; and two three-phase generator PT voltage inputs that can be connected together for generator voltage feedback.
The board has two trip relay outputs, which are typically used to drive a customer lockout device with two-of-three hardware voting outputs. This model can be used in both regulator and static systems, rather than just one of them.
Product Attributes
The Excitation Control System I/O Interface refers to the Input/Output interface between the control system and the various components and devices in a turbine. The I/O interface enables the control system to receive input signals from various sensors and devices, process the data, and generate output signals to control and regulate the various components in the turbine.
In a typical turbine excitation control system, the I/O interface includes a combination of analog and digital inputs and outputs, which are used to monitor various parameters such as temperature, pressure, speed, and position, as well as to control actuators and other components in the system. The I/O interface may also include communication interfaces for connecting to remote control systems, data logging systems, and other devices.
The I/O interface is a critical component of the excitation control system, as it enables the control system to gather data from the various components and devices in the turbine, process this data, and generate appropriate control signals to regulate the turbine's operation. This helps to ensure safe, efficient, and reliable operation of the turbine, while also improving overall performance and availability.
System Features
This Excitation Control is a cutting-edge control for new and retrofit steam, gas, and hydro generators. To ensure the delivery of a true system solution, the control hardware and software design is closely coordinated between GE's system and controls engineering.
The EX2100e control, Mark VIe control, Mark VI Integrated Control System (ICS), LS2100e Static Starter, and human-machine interface (HMI) are all seamlessly integrated. Integration with customer distributed control systems (DCS) via ModBus Ethernet is supported for stand-alone retrofit applications.
The system is available in a variety of configurations to provide full static and regulator control. To meet field current requirements in static applications, Thyristor silicon-controller rectifier (SCR)-based systems use cells with sizes of 42, 53, 77, and 100 mm. PWM systems employ Insulated Gate Bipolar Transistors (IGBTs) to provide up to 35 A or 120 A outputs for Regulator system applications.
EX2100e Overview The EX2100e control system is available in a variety of configurations to provide full static and regulator control. To meet field current requirements in static applications, Thyristor silicon-controller rectifier (SCR)-based systems use cells with sizes of 42, 53, 77, and 100 mm. PWM systems employ Insulated Gate Bipolar Transistors (IGBTs) to provide up to 35 A or 120 A outputs for Regulator system applications. These systems are capable of supporting the following applications:
Potential source to 8000 A, static
Compound source, static
Regulator system Alterrex
Saturable Current Transformers/Power Potential Transformer Regulator (SCT/PPT)
Exciter Regulator with Brushless Motor
Rotating Exciter Regulator for Direct Current (dc)
services we provide
Testing & Repair
Repair and Testing of circuit boards to diagnose ensure functionality to maintain current inventory and retain obsolete circuit boards/modules.
Training
Controls including HMI Training for Engineers, Technicians and Operators with wide variety of practical equipment including Management and Health & Safety.
Purchase
You upgrade equipment and we purchase your surplus inventory to maximize the value of unused or end of life assets.
featured products
IS420UCSBH4A
Module manufactured by General Electric as part of the IS420UCSBH4A series used in gas turbine speedtronic control systems.
IS220PSCAH1B
Module manufactured by General Electric as part of the IS220PSCAH1B series used in gas turbine speedtronic control systems.
IS220PDIAH1B
Module manufactured by General Electric as part of the IS220PDIAH1B series used in gas turbine speedtronic control systems.
IS220PDOAH1B
Module manufactured by General Electric as part of the IS220PDOAH1B series used in gas turbine speedtronic control systems.
IS200STCIH2A
Module manufactured by General Electric as part of the IS200STCIH2A series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS200SRLYH2A series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS420UCSBH4A series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS220PSCAH1B series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS220PDIAH1B series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS220PDOAH1B series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS200STCIH2A series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS200SRLYH2A series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS200SSCAH2A series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS220PPROS1B series used in gas turbine speedtronic control systems.
IS200SRLYH2A
Module manufactured by General Electric as part of the IS230PCAAH1B series used in gas turbine speedtronic control systems.