IS200HSLAH2A - High-speed Serial Link Interface Board

Functional Description

IS200HSLAH2A is a High-speed Serial Link Interface Board for Host Application Boards manufactured by General Electric and is a part of the EX2100e regulator dual control system. The card is serially connected to the EX2100e ERAX M1 and M2 to UCSB CPU M1 and M2. The board has two jack inputs and outputs on its top surface. These are placed side by side along with one of the board's short edges. The board has two Halo TG 110-EO 50N5 transformers. Over twenty integrated circuits make up the board, including an FPGA (field-programmable gate array) at U1. There are two more (female) connectors on the bottom of the board. The FA/00 code is penned on the PCB. Multiple conduction sensors are integrated onto the card.

IS200HSLAH2A CONTROL SOFTWARE
The EX2100e control software provides high performance and aids in the understanding, installation, commissioning, tuning, and maintenance of the excitation control system by customers and field engineers. The exciter software is configured and loaded in the controllers using the ToolboxST application. On the ToolboxST Component Editor screen, the program is represented as control blocks that are coupled together to depict the signal flow.
The software transducer system's output comprises the following:

• The voltage of the generator
• Current generated by the generator (average in phase with watts)
• Reactive current generated by the generator (average in phase with reactive power, VARs)
• The frequency of the generator (current)
• Make a mistake (signal representing the change in the rotor speed)

The output is used by the transducer system to calculate the following:

• VARs and generator power
• Generator flux magnitude (V/Hz)
• Power factor and phase angle