IS200JPDMG1A - POWER DISTRIBUTION BOARD

IS200JPDMG1A is a Power Distribution Module developed by GE under Mark VI. The Speedtronic Mark VI is a gas and steam turbine management system that has been in use for decades. The Mark VI is one of the most complex models in the series, including Ethernet connectivity, triple redundant control configuration within the Control Module, and an HMI Operator Interface based on a PC running Windows.

• The IS200JPDMG1A is a board for power distribution. Two 50-pin connections (P1/P2) are used on the board. It features a total of twelve fuses in three lines. A PPDA I/O pack is connected to the board through a DC62 female connection (JA1).
• Two terminal blocks are located on opposing sides of the PCB on the board. Three power buses are accessible through these terminal blocks.
• Each screw on the terminal blocks can handle a maximum of 35 amps. Three 9-position plugs, seven 2-position plugs, and three 6-position plugs make up the IS200JPDMG1A's total of thirteen plugs.
• Four varistors, three inductor coils, transistors, resistors, and capacitors are also on the board.
• The IS200JPDMG1A is mounted on a DIN-rail. The board is 6.5 by 7 inches.